加强松花江上游石油开发的预警研究

松花江上的石油开发对松花江和哈尔滨市饮用水源地的潜在污染危害已引起政府部门的重视.松花江上石油开发中一旦出现事故其污染所造成突发事故将是十分严重的.应加强松花江上石油开发的预警研究.并对松花江上的石油开发现状、存在的问题和隐患进行深入调查研究.对江上已开发和在建油田制定出相应对策,确保松花江水质安全和哈尔滨市饮用水源地的水质安全.     

不同类型污染源颗粒物的粒度分布特征分析

对影响葫芦岛市城区环境质量可吸入颗粒物的各类污染源颗粒物的粒度成份、分布特征进行分析。采用斯托克直径ds(Stokes′Diameter)表示法,利用巴柯离心机对样品进行处理,得到各类排放源所排放的不同粒径的颗粒物重量百分比,为环境管理提供科学依据。     

污染物零排放的化石燃料燃烧系统

介绍了熔融盐循环热载体无烟燃烧技术(nonflame combustion technology usingthermal cyclic carrier of molten salt,简称NFCT).利用沉淀法制备了Fe2O3粉末,并通过机械法加工成氧载体.XRD分析表明所制备的Fe2O3粉末为单一的α-Fe2O3相在固定床反应器中表征了氧载体得失晶格氧的过程,随循环次数的增多,氧载体被CH4还原的速率会有所增加,氧载体在CH4和空气气氛中得失晶格氧是可逆过程,反应后,氧载体内部形成了蜂窝状结构.氧载体的转化度最大为82%,占氧载体总质量18%的晶格氧可以用来氧化CH4.在熔融盐反应器中用CH4作为燃料和所制备的氧载体进行了燃料燃烧和氧载体复原的实验研究在燃料燃烧反应的开始阶段,CH4大部分被氧化成了CO2,CO2的体积分数最高可以达到85%,随着反应时间的增加,氧载体的氧化能力下降,不完全氧化产物CO和未反应的CH4的体积分数逐渐升高,3000s时,CO2的体积分数只有50%在氧载体恢复晶格氧的过程中,在1500s以前,空气中的O2都被氧载体所吸收,1500s以后,该过程排出气体中的O2体积分数开始上升,至2000s气体成分与空气的成分相同.在实验中没有检测出NOx的生成.     

ACCU采样和PIXE技术用于PM10污染溯源的研究

使用美国RP公司生产的多通道自动采样系统(ACCU)在上海吴淞工业区进行冬季3个月8个不同风向的PM10采样；使用质子激发X荧光发射方法(PIXE)测定颗粒物中18个无机元素浓度．结果发现，8个风向的质量浓度分布取决于不同方位的大气质量状况．将大气颗粒物中的元素浓度作为环境污染指纹，8个方位的无机元素浓度分布与采样点周围的居民住宅、道路交通和工矿企业的排放密切相关，表明该方法能准确地确定排放源的范围和污染来源．研究结果表明，ACCU采样系统和PIXE分析技术的优化组合可为大气污染溯源、治理和改善环境空气质量提供一种快速和准确可靠的新方法．     

Characteristics of air particulate matter and their sources inurban and rural area of Beijing, China

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｒｅｉｓａｇｒｏｗｉｎｇａｗａｒｅｎｅｓｓｔｏｔｈｅｉｍｐｏｒｔａｎｃｅｏｆａｉｒｐｏｌｌｕｔｉｏｎｉｎｍａｊｏｒｃｉｔｅｓ.Ａｎｕｍｂｅｒｏｆｓｔｕｄｉｅｓｈａｖｅｓｈｏｗｎｔｈａｔｔｈｅｃｏｎｃｅｎｔｒａｔｉｏｎｓｏｆｃｅｒｔａｉｎｔｒａｃｅｅｌｅｍｅｎｔｓｉｎｔｈｅｕｒｂａｎａｔｍｏｓｐｈｅｒｅｈａｖｅｂｅｅｎｅｌｅｖａｔｅｄｂｙ ｐｏｌｌｕｔｉｏｎ ,ａｎｄｔｈｅｒｅｆｏｒｅ ,ｔｈｅｈｉｇｈｅｓｔｃｏｎｃｅｎｔｒａｔｉｏｎｓｏｆｔｈｅｓｅｃｈｅｍｉｃａｌｃｏｎｔ…     

城市交通机动车污染控制研究进展

城市交通机动车污染问题非常复杂，在许多不可控因素，城市交通是一个动态系统，污染物排放量始终处于变化之中，控制城市交通污染，必须严格控制机动车排放，该文介绍了国内外对城市机动车污染控制研究的概况，以及几种城市中污染物扩散的模型，展望了这方面研究前发展趋势，并提出了可持续发展的效能系统设计与管理的新概念。     

Chance-constrained programming (CCP)abatement of SO_2 emission for acid deposition control in Liuzhou City

A deterministic linear programming model which optimizes the abatement of each SO2 emission source, is extended into a CCP form by introducing equations of probabilistic constrained through the incorporation of uncertainty in the source-receptor-specific transfer coefficients. Based on the calculation of SO2 and sulfate average residence time for Liuzhou City, a sulfur deposition model has been developed and the distribution of transfer coefficients have been found to be approximately log-normal. Sulfur removal minimization of the model shows that the abatement of emission sources in the city is more effective, while control cost optimization provides the lowest cost programmes for source abatement at each allowable deposition limit under varied environmental risk levels. Finally a practicable programme is recommended.     

Methodological and Practical Considerations for Developing Multiproject Baselines for Electric Power and Cement Industry Projects in Central America

The Lawrence Berkeley National Laboratory (Berkeley Lab) and the Center for Sustainable Development in the Americas (CSDA) conducted technical studies and organized two training workshops to develop capacity in Central America for the evaluation of climate change projects. This paper describes the results of two baseline case studies conducted for these workshops, one for the power sector and one for the cement industry, that were devised to illustrate certain approaches to baseline setting. Multiproject baseline emission rates (BERs) for the main Guatemalan electricity grid were calculated from 2001 data. In recent years, the Guatemalan power sector has experienced rapid growth; thus, a sufficient number of new plants have been built to estimate viable BERs. We found that BERs for baseload plants offsetting additional baseload capacity ranged from 0.702 kgCO2/kWh (using a weighted average stringency) to 0.507 kgCO2/kWh (using a 10th percentile stringency), while the baseline for plants offsetting load-following capacity is lower at 0.567 kgCO2/kWh. For power displaced from existing load-following plants, the rate is higher, 0.735 kgCO2/kWh, as a result of the age of some plants used for meeting peak loads and the infrequency of their use. The approved consolidated methodology for the Clean Development Mechanism yields a single rate of 0.753 kgCO2/kWh. Due to the relatively small number of cement plants in the region and the regional nature of the cement market, all of Central America was chosen as the geographic boundary for setting cement industry BERs. Unfortunately, actual operations and output data were unobtainable for most of the plants in the region, and many data were estimated. Cement industry BERs ranged from 205 kgCO2 to 225 kgCO2 per metric ton of cement.     

不同类型污染源颗粒物的粒度分布特征分析

对影响葫芦岛市城区环境质量可吸入颗粒物的各类污染源颗粒物的粒度成份、分布特征进行分析。采用斯托克直径ds（Stoke＇s Diameter）表示法，利用巴柯离心机对样品进行处理，得到各类排放源所排放的不同粒径的颗粒物重量百分比，为环境管理提供科学依据。     

重型柴油车实际道路排放与行驶工况的相关性研究

采用SEMTECH-D车载排放测试仪测量了东风柴油卡车在城市实际道路工况以及等速和加速工况下的油耗及污染物排放状况.测试结果显示,测试卡车实际道路综合百公里油耗为17.8 L,NOx、CO和HC排放因子分别为3.96、8.86和2.15g·km-1.其中主干道路况相对较差,油耗与排放因子较高,是所有测试道路平均水平的1.3～1.8倍左右.研究结果表明,重型车油耗及污染物排放与各行驶工况下的速度、加速度均密切相关,车辆在高速加速行驶状态下易产生高排放.车辆在30～50 km·h-1速度区间内等速行驶时,油耗与排放因子最为经济且环境友好.车辆在加速行驶时,油耗与NOx、CO排放因子可达到城市实际道路平均水平的2.0、2.2、1.4倍,急加速时达到2.8、2.1、14倍.应用比功率概念可准确描述车辆在各运行工况下的排放水平,但在重型车上缺乏实验依据,有待进一步研究.